12.另開一個Terminal，運行ifconfig可以看到接口中已經出現了ppp0設備，如下圖所示：
ppp0 Link encap:Point-to-Point Protocol
inet addr:220.192.68.149 P-t-P:220.192.64.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:66 (66.0 b) TX bytes:84 (84.0 b) |
可以看到已經獲得了動態地址220.192.68.149
13.這時候需要手工添加一條默認路由：route add default ppp0 ，添加完成后可以ping遠端的一個地址試試是否真的上網了，例如說在公網上可以ping 166.111.8.238，應該會通；
14.如果要掛斷ppp聯接，很簡單，只要切換到wvdial所在的Terminal，然后按Ctrl + C即可，也可以給kill掉wvdial 進程，結果如下:
Caught signal #2! Attempting to exit gracefully...
--> Disconnecting at Thu JULY 13 17:58:26 2004
[root@test ppp]# ppp0 Link encap:Point-to-Point Protocol |
