Router1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router1(config)#service config
Router1(config)#boot network tftp Network-auto 172.25.1.1
Router1(config)#boot host tftp Router8-auto 172.25.1.1
Router1(config)#end
Router1#
注釋 service config缺省是關(guān)閉的，如果打開后缺省會去查找的文件名為network-config, cisconet.cfg, router1-confg, router1.cfg 等 |
